Loaded Strat Pickguard SSS Hand-Wound Custom 50s Alnico 5 Pickups fits Fender

Posted On February 5, 2026 | Comments Closed |

Vintage 50s Strat tone, hand-wound in small batches. Open, airy, bell-like pickups with classic 50s dynamics and clarity. Built and gig-tested by me in NSW. Drop-in for most modern Strats. Available in multiple pickguard and hardware colour options see photos or message me. I hand-wind every coil myself in small batches, chasing the clean, airy, bell-like Strat tone I’ve always loved. I gig regularly with the same pickups and pickguards I sell, and I’m constantly refining my Strat builds. This isn’t a kit of cheap parts. It’s a carefully built, short-run piece of gear, made one at a time with attention to detail and tone. Tone & Feel (50s-inspired). Bright but soft, never harsh. Highly dynamic and responsive. Tight in the bass, with fast attack. They’re low-output and expressive, rewarding touch and volume-knob control classic Strat behaviour. If you’re after clarity, definition, and character, something that doesn’t sound mass-produced: this is it. Vintage Fender-style wiring (modern hookup wire). Vintage 50s output: approx. 6.3k? Bridge, 5.6k? Middle / neck. 42 AWG magnet wire (Elektrisola or Remington). Alnico 5 staggered rod magnets. CTS 250k audio taper pots (dish-back). Fully assembled and tested. If you’re after classic 50s Strat tone with clarity, dynamics, and character, without the feel of mass-produced parts, this is built for you. Check the photos and specs, and feel free to message me if you have questions or want to discuss a variation.

Posted under loaded Tags: alnico, custom, fender, fits, hand-wound, loaded, pickguard, pickups, strat

Genuine Fender MIM Stratocaster HSS Loaded Loaded Pickguard Ceramic Pickups

Posted On | Comments Closed |

Genuine Fender Standard Series Stratocaster Loaded Pickguard. White with 3 single ceramic magnet coils and white plastics. Fender Pots and 5 way switch.

Posted under genuine Tags: ceramic, fender, genuine, loaded, pickguard, pickups, stratocaster

Radioshop Pickups

Posted On February 1, 2026 | Comments Closed |

Posted under radioshop Tags: pickups, radioshop

USA Fender SRV Custom Shop Strat LOADED PICKGUARD Josefina Texas Special Pickups

Posted On | Comments Closed |

USA Fender SRV Custom Shop Strat LOADED PICKGUARD Josefina Texas Special Pickups. This is as good as it gets, if you ever wanted the ultimate SRV Strat, just add this loaded pickguard to your guitar and you will have one of the highest quality best sounding set ups ever put in a Custom Shop Strat. This is a USA Fender Stevie Ray Vaughan SRV Stratocaster Loaded Pickguard complete with Josefina Hand Wound Texas Special Pickups, 250K Pots, 5 Position Switch, and Knobs even includes mounting the screws. The Pickguard was pulled from a 2025 USA Fender SRV Signature Stratocaster still has the plastic on it, then we used new CTS 250k pots, a. 05 Fender Cap, a new USA CRL 5 way switch and a set of 2020 Josefina hand wound Texas Special Pickups. Type: Loaded Pickguard (Black 3 Ply). Comments: Perfect condition- plastic still on the pickguard.

Posted under fender Tags: custom, fender, josefina, loaded, pickguard, pickups, shop, special, strat, texas

Prewired Loaded Pickguard with SSS Single Coil Pickups for Fender Strat Guitar

Posted On January 31, 2026 | Comments Closed |

Material: metal, plastic, copper, magnet. Color: light yellow, can be customized. Resistance Value: N/M/B: 6.16K? /6.57K? /7K? (K resistance value is for reference only and will change with temperature). Hole Pitch: N/M/B: 52mm/52mm/52mm. Size: 285x220x60MM/11.22×8.7×2.4 inches (LxWxH). 1 x 3-ply guitar guard. 3 x Alnico SSL1 single-coil pickups. 1 x 5-way switch. 3 x CTS potentiometers 1V2T (copper shaft). 1 x 473J 400V CDE capacitor (made in USA). 1 x Output Jack.

Posted under prewired Tags: coil, fender, guitar, loaded, pickguard, pickups, prewired, single, strat

Strat Loaded Pickguard Hand-Wound 50s Cream White Alnico 5 Pickups fits Fender

Posted On January 25, 2026 | Comments Closed |

This Loaded Stratocaster SSS pickguard features Alnico 5, hand-wound with hotter on the bridge and clean on the neck pickups wound and assembled entirely by me. It’s a drop-in replacement for most modern Strats. Just solder the output jack and you’re ready to play. I hand-wind every coil myself in small batches, chasing that clean, airy, bell-like Strat tone I’ve always loved. I gig with the same pickups I sell and I’m constantly tinkering with Strats. This is not a kit full of cheap parts, it’s a lovingly built piece of gear made in short runs, one at a time. You’ll hear the difference: classic Strat chime, great definition, and touch-sensitive response. Wiring follows vintage Fender spec. The neck is right about vintage 50s spec giving you a bright bell like Strat tone and the bridge is slightly warmer to balance the volume. The middle is a balance between the two. It’s a relatively bright winding of the pickups with scooped mids and nice high end. If you want a different colour or spec, check my other listings or send me a message. I often have variations available. Elektrisola 42 AWG wire. Alnico 5 rod magnets. RWRP middle for hum-cancelling in 2 & 4. CTS dish back pots. Genuine Fender 5-way Grigsby switch. Pickguard still has protective film.

Posted under strat Tags: alnico, cream, fender, fits, hand-wound, loaded, pickguard, pickups, strat, white

Stratocaster Loaded Pickguard Silver Land Pickups 5 Sssss Bb Guitar Lab

Posted On January 23, 2026 | Comments Closed |

Posted under stratocaster Tags: guitar, land, loaded, pickguard, pickups, silver, sssss, stratocaster

HSH Guitar Prewired Loaded Pickguard Active Pickups for Fender Strat Guitar

Posted On January 21, 2026 | Comments Closed |

Active Pickups (HSH Configuration): Experience high-output, low-noise performance with active pickups. The onboard preamp boosts the signal, resulting in a powerful and clear tone suitable for high-gain settings. Noise Reduction: Active pickups are designed to minimize hum and interference, ensuring a clean signal even in high-gain environments. High Output and Clarity: The active circuitry provides a higher output with excellent clarity, making your guitar tone more pronounced and articulate. Prewired for Easy Installation: Includes 1 Volume, 2 Tone controls, and a 5-way selector switch. Ready to install, saving you time and effort. Durable Black Pickguard: Protects your guitar body while adding a sleek, professional look. 1 x Prewired Loaded Pickguard Set (1V2T, 5-way switch, HSH Active Pickups).

Posted under guitar Tags: active, fender, guitar, loaded, pickguard, pickups, prewired, strat

Prewired Loaded Pickguard with HHH Humbucker Pickups for Fender Strat Guitar

Posted On January 18, 2026 | Comments Closed |

Neck humbucker: 7.5K (3.75K split-coil). Bridge humbucker: 15K (7.5K split-coil). Weight: 700g per set. Tip: Please check the pickguard size chart carefully before purchasing to make sure the hole pattern is compatible with your pickups, otherwise you may need to make necessary adjustments. 1 x 3-ply guitar pickguard. 3 Alnico 5 humbucker pickups. 1 Enhanced Toggle Switch. 3 potentiometers (1 volume, 2 tone, copper shaft). 4 single-cut toggle switches. 1 x 400V/200V capacitor. In addition to the original functions, two single-cut toggle switches bring new functions. For example, toggle on + 5-position switch in bridge position = neck and bridge pickups work simultaneously.

Posted under prewired Tags: fender, guitar, humbucker, loaded, pickguard, pickups, prewired, strat