Strat Loaded Pickguard

Strat_Loaded_Pickguard_Vintage_60s_Hand_Wound_Alnico_5_CTS_Oak_Grigsby_Prewired_01_wd

Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired

Posted On May 8, 2026 | Comments Closed |
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired

Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Hand-wound’60s Strat-style loaded pickguard, hand-wired with quality components and ready to drop in. The result is a classic’60s Strat tone with added sparkle on the top end, while still holding onto body and balance. With a slightly stronger presence, it cuts through cleanly and stays defined when pushed, delivering that familiar bell-like Strat character without turning muddy under gain. Everything is fully assembled, hand-wired and tested before it leaves the bench, so you get a clear, articulate setup that drops straight into your guitar. No soldering, no chasing parts, no guesswork. High-scatter Hand-wound Classic’60s Strat-style single coils. 42 AWG poly magnet wire. Middle: 6.0k (RWRP for hum-cancelling in positions 2 & 4). Oak Grigsby 5-way blade switch. CTS 250k audio taper pots. 0.047µF 225P film capacitor, Elpac. Tone 2: middle + bridge. Fits most modern Strat-style guitars. May not fit some Squier models.
Strat Loaded Pickguard Vintage 60s Hand Wound Alnico 5 CTS Oak Grigsby Prewired
Posted under strat Tags: , , , , , , , ,
Strat_Loaded_Pickguard_Hand_Wound_Alnico_5_Set_Vintage_Style_Fits_Fender_01_zhpo

Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender

Posted On April 30, 2026 | Comments Closed |
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender

Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender
Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. A versatile setup – clear and open in the neck, with a bit more push from the bridge when you lean into it. A balanced set that covers clean rhythm through to slightly hotter lead tones, with the hand-wound pickups adding character and depth. Hand-wound bridge and middle pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage Style Fits Fender
Posted under strat Tags: , , , , , , , , ,
For_Strat_Guitar_Prewired_Loaded_Pickguard_Wilkinson_Alnico_5_Humbucker_Pickups_01_uzl

For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups

Posted On April 27, 2026 | Comments Closed |
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups

For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
The surface of the product is covered with a film to prevent scratches and damage. Please remove the film before installing the product on the guitar. Material: Metal, plastic, copper, magnets. Resistance: N/M/B: 6.5Kohm/ 6.8Kohm/ 14.5Kohm. (K resistance is for reference only, which will change as the temperature changes). Hole Distance: N/M/B: 50mm/52mm/52mm. 1X 3-ply Guitar Pickguard. 2X single coil pickups. 1X 473J 400V Caps (Made in USA). In addition to the original function, the single-cut toggle brings new functions, as follows. Toggle on + 5-way at the bridge pickups = neck and bridge pickups work together. Toggle on + 5-way at the middle pickups = neck and middle pickups work together.
For Strat Guitar Prewired Loaded Pickguard Wilkinson Alnico 5 Humbucker Pickups
Posted under strat Tags: , , , , , , , ,
SSS_Prewired_Loaded_Strat_pickguard_Set_Alnico_5_1_Pickups_Set_For_Fender_ST_01_oxkn

SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST

Posted On April 26, 2026 | Comments Closed |
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST

SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
Material: Metal, plastic, copper, magnets. Color: Light yellow, can be customized. Resistance: N/M/B: 6.16Kohm/6.57Kohm/ 7Kohm. (K resistance is for reference only, which will change as the temperature changes). Hole Distance: N/M/B: 52mm/52mm/52mm. Size: 285x220x60MM/11.22×8.7×2.4Inch (L x W x T). 1X 3-ply Guitar Pickguard. 3X Alnico SSL1 single coil pickups. 3X CTS potentiometer 1V2T (Copper Shaft). 1X 473J 400V CDE Caps (Made in USA). When the 5-speed switch is placed in the first position, the neck pickups work. After pressing the enhanced switch at this time, neck + bridge pickups will work at the same time. When the 5- speed switch is in the second position, the neck + middle pickups work together, pressing the enhanced function switch at this time, neck + middle + bridge pickups will work at the same time.
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
Posted under prewired Tags: , , , , , ,
SSS_Prewired_Loaded_Strat_pickguard_Set_Alnico_5_1_Pickups_Set_For_Fender_ST_01_dqqu

SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST

Posted On April 24, 2026 | Comments Closed |
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST

SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
Specifications: Material: Metal, plastic, copper, magnets Resistance: N/M/B: 6.16Kohm/6.57Kohm/ 7Kohm (K resistance is for reference only, which will change as the temperature changes) Hole Distance: N/M/B: 52mm/52mm/52mm Brand name: Angels Size: 285x220x60MM/11.22×8.7×2.4Inch (L x W x T) Weight: 700g/1.54lb Package include: 1X 3-ply Guitar Pickguard 3X Alnico SSL1 single coil pickups 1X 5-way switch 3X CTS potentiometer 1V2T (Copper Shaft) 1X 473J 400V CDE Caps (Made in USA) 1X Output Jack 11x Screws Importation Tips 1. When the 5-speed switch is placed in the first position, the neck pickups work. After pressing the enhanced switch at this time, neck + bridge pickups will work at the same time. When the 5- speed switch is in the second position, the neck + middle pickups work together, pressing the enhanced function switch at this time, neck + middle + bridge pickups will work at the same time.
SSS Prewired Loaded Strat pickguard Set, Alnico 5 1 Pickups Set For Fender ST
Posted under prewired Tags: , , , , , ,
Strat_Loaded_Pickguard_Hand_Wound_Alnico_5_Set_Vintage_60s_Style_Fits_Fender_01_krn

Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender

Posted On April 23, 2026 | Comments Closed |
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender

Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender
Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. Loaded vintage 11-hole pickguard with hand-wound Alnico 5 pickups, voiced for a medium-wound early’60s-style tone. The neck is lower output and clear, with a slightly hotter bridge that holds up well for clean lead work. A balanced, expressive set with plenty of character from the hand-wound, high-scatter pickups. Hand-wound Alnico 5 pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.
Strat Loaded Pickguard Hand Wound Alnico 5 Set Vintage 60s Style Fits Fender
Posted under strat Tags: , , , , , , , , ,
Genuine_Fender_Player_Stratocaster_HSS_Loaded_Black_Pickguard_Alnico_V_Pickups_01_cj

Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups

Posted On April 19, 2026 | Comments Closed |
Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups
Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups
Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups
Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups

Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups
2023 Genuine Fender Players Series Stratocaster Loaded Pickguard HSS. Alnico V single coils and Alnico 2 Humbucker. White pups and knobs. Fender Pots and Superswitch. Great and easy Upgrade for your MIM Standard Strat. 2024 Genuine Fender Player Series Stratocaster Loaded Pickguard. Black with 3 single coils and 1 humbucker with vintage white plastics. Fender Pots and 5- way switch. Feedback: It’s important to me. If there is any reason you cannot leave a positive review please give me a chance to resolve any problems. I will respond to questions within one day or less.
Genuine Fender Player Stratocaster HSS Loaded Black Pickguard Alnico V Pickups
Posted under genuine Tags: , , , , , , , ,
Strat_Loaded_Pickguard_Modded_Alnico_5_Set_Duncan_Designed_Fits_Fender_01_lova

Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender

Posted On April 18, 2026 | Comments Closed |
Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender
Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender
Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender
Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender

Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender
Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. Loaded with modified Duncan Designed Alnico 5 pickups, with a hotter bridge and a medium-wound neck and middle. The factory shielding has been removed, which opens them up and improves clarity. A solid, punchy setup with a bit more output in the bridge while keeping usable, balanced tones across the other positions. Modified Duncan Designed Alnico 5 pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.
Strat Loaded Pickguard Modded Alnico 5 Set (Duncan Designed) Fits Fender
Posted under strat Tags: , , , , , , , ,
SSH_Prewired_Loaded_Pickguard_with_Alnico_5_Pickups_for_Fender_Strat_Guitar_01_orrx

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On April 16, 2026 | Comments Closed |
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
Material: metal, plastic, copper, magnet. Dimensions: 285x220x60mm/11.22×8.7×2.4 inches (LxWxT). 1 x 3-ply guitar guard. 2 x Alnico 5 single-coil pickups. 1 x 5-way switch. 3 potentiometers (1 volume, 2 tone). 1 single cutaway switch. 1 x 473J 400V capacitor (made in USA). 1 x Output Jack.
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
Posted under prewired Tags: , , , , , , ,
SSH_Prewired_Loaded_Pickguard_with_Alnico_5_Pickups_for_Fender_Strat_Guitar_01_lj

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On April 11, 2026 | Comments Closed |
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
The product is covered with a protective film to prevent scratches and damage prior to installation on the guitar. This protective film needs to be removed before installation. Material: metal, plastic, copper, magnet. Resistance: 8-9k ohms, 8-9k ohms, 14.5k ohms for N/M/B (neck/middle/bridge pickups) respectively. Resistance values are for reference only; actual values will vary with temperature. Hole pitch: 50mm/52mm/52mm for N/M/B respectively. Applicable hand type: Right hand. 1 x 3-ply guitar guard. 2 x Split Coil Mini Zebra Humbuckers. 1 x Alnico 5 humbucker. 1 x 5-way switch. 3 x 1V2T potentiometers. 1 x 473J 400V capacitor (made in USA). 1 x Output Jack. In addition to the basic functions, the single-cut switch brings new functionality.
SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar
Posted under prewired Tags: , , , , , , ,
1 2 3 … 26