Fender Stratocaster Loaded Pickguard. Vintage Noiseless withS-1 Excellent

Posted On October 10, 2026 | Comments Closed |

Fender Stratocaster Loaded Pickguard. Vintage Noiseless pickups, w/S-1 switch (button). Mint Green w/matching backplate and screws.

Posted under fender Tags: excellent, fender, loaded, noiseless, pickguard, stratocaster, vintage, withs-1

Fender Stratocaster Loaded Pickguard Seymour Duncan Dimebag Excellent

Posted On October 9, 2026 | Comments Closed |

Fender Stratocaster Loaded Pickguard. Seymour Duncan HR101 Dual Blade Humbuckers in the neck and middle position. Modeled after the Duncan high output “Hot Rails”, these are screamers. Excellent condition, includes matching backplate and screws.

Posted under fender Tags: dimebag, duncan, excellent, fender, loaded, pickguard, seymour, stratocaster

Fender Stratocaster Loaded Pickguard HH Very Good Condition

Posted On | Comments Closed |

Fender Stratocaster Loaded Pickguard HH. These were from a Blacktop Strat, and have the Hot Vintage Alnico Humbuckers. The BHK sticker signifies these were produced by. This setup has the push pull S-1 type option on the lowest tone control. Comes with matching backplate and screws.

Posted under fender Tags: condition, fender, good, loaded, pickguard, stratocaster, very

HSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On October 7, 2026 | Comments Closed |

Material: metal, plastic, copper, magnet. Hole spacing: neck/middle/bridge: 50mm/52mm/52mm. 1 x 3-ply guitar guard. 2 Alnico V dual single coil pickups. 1 x 5-way switch. 1 x boost switch. 3 x 1V2T potentiometers (copper shaft). 2 single pole switches. 1 x 473J 400V capacitor (made in USA). 1 x Output Jack. In addition to the original features, two single-pole toggle switches and an enhancement switch bring new functionality. The neck and bridge pickups have separate single-knife (push-pull) toggle switches.

Posted under prewired Tags: alnico, fender, guitar, loaded, pickguard, pickups, prewired, strat

SSH Prewired Loaded Pickguard with Yellow Mini Pickups for Fender Strat Guitar

Posted On October 6, 2026 | Comments Closed |

(Resistance values are for reference only and will vary with temperature). 3 x 1V 2T potentiometers. 1 x output jack. Weight: 700 grams per set.

Posted under prewired Tags: fender, guitar, loaded, mini, pickguard, pickups, prewired, strat, yellow

SSH Left Handed Prewired Loaded Pickguard for USA/Mexican Fender Strat Guitar

Posted On | Comments Closed |

Fiber-coil single-coil and Alnico V humbucking pickups. Upgraded pre-installed brass CTS potentiometers. 250k CTS potentiometers for volume and tone adjustments, combined with orange CDE capacitors, produce a hotter sound and stronger treble. Multi-function 7-way toggle switch. The 3-layer guard is covered with a protective film to prevent scratches and damage, and can withstand the rigors of gigging and touring for long-lasting durability. Powerful Alnico V Magnets.

Posted under left Tags: fender, guitar, handed, left, loaded, pickguard, prewired, strat, usamexican

USA Fender American Performer Stratocaster Yosemite Pickups Harness Loaded Guard

Posted On October 4, 2026 | Comments Closed |

This is a set of Fender USA Stratocaster Yosemite pickups in unused condition with the complete wiring harnes, mounted on used non-Fender pickguard in good condition that fits a Fender Stratocaster.

Posted under fender Tags: american, fender, guard, harness, loaded, performer, pickups, stratocaster, yosemite

HHH Guitar Prewired Loaded Pickguard Humbucker Pickups for Fender Strat Guitar

Posted On | Comments Closed |

Neck humbucker: 7.5K (3.75K split-coil). Bridge humbucker: 15K (7.5K split-coil). Weight: 700g per set. Tip: Please check the pickguard size chart carefully before purchasing to make sure the hole pattern is compatible with your pickups, otherwise you may need to make necessary adjustments. 1 x 3-ply guitar pickguard. 3 Alnico 5 humbucker pickups. 1 Enhanced Toggle Switch. 3 potentiometers (1 volume, 2 tone, copper shaft). 4 single-cut toggle switches. 1 x 400V/200V capacitor.

Posted under guitar Tags: fender, guitar, humbucker, loaded, pickguard, pickups, prewired, strat

Genuine Fender Squier Strat LOADED SSS PICKGUARD WithSCREWS Black PEARL Affinity

Posted On September 27, 2026 | Comments Closed |

This is a fully loaded, 11-Hole pickguard from an Affinity series Squier Strat. Pre-Wired Drop-In Unit (Soldering to Jack Required). The pickguard is Black Pearl 3-ply. It is covered with. Protective Film Nice and Shiny Underneath! It is loaded with three ceramic single coil pickups in the classic SSS configuration. The Jack and Jack Plate are not included. The mounting screws are included. It is in fully functional condition. There is no retail packaging. These items are from brand new guitars that we break down for parts. We are an authorized Fender dealer. Mobile device users: swipe right (or right arrow) for more item details. See “Item Details” under “About this Item” for more info. This item has been removed from a brand new Fender Squier Strat.

Posted under genuine Tags: affinity, black, fender, genuine, loaded, pearl, pickguard, squier, strat, withscrews

Prewired Loaded Pickguard SSH Alnico 5 Humbucker Pickups for Fender Strat Guitar

Posted On September 24, 2026 | Comments Closed |

To prevent scratches and damage, the product is covered with a protective film. Be sure to remove this protective film before installing it on your guitar. Weight: 700 grams per set. 1 x 3-ply guitar guard. 2 x Alnico 5 single coil pickups. 1 x 5-way switch. 3 x 1V 2T potentiometers (copper shaft). 2 single-pole toggle switches. 1 x 400V/200V capacitor. In addition to the original function, the single-knife toggle switches bring new functionality.

Posted under prewired Tags: alnico, fender, guitar, humbucker, loaded, pickguard, pickups, prewired, strat

1 2 3 … 332 Next »

M	T	W	T	F	S	S
« Sep
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31