Left Hand Prewired Loaded Pickguard SSH Alnico 5 Pickups for Fender Strat Guitar

Posted On November 20, 2024 | Comments Closed |

To prevent scratches and damage, the product is covered with a protective film. Please remove this protective film before installing it on your guitar. Place of Origin: China. Single coil (Single coil), Single coil, Humbucker. Installation Difficulty: Very easy to install. Weight: 700 grams per set. 1 x 3-ply guitar guard. 2 x Alnico 5 single coil pickups. 1 x 5-way switch. 3 x 1V 2T potentiometers (copper shaft). 1x single cutaway toggle switch. 1 x 400V/200V capacitor.

Posted under left Tags: alnico, fender, guitar, hand, left, loaded, pickguard, pickups, prewired, strat

HSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On November 19, 2024 | Comments Closed |

Model: Upgraded HSH guitar pre-installed guard set. Material: Alnico 5 pickups, imported copper wire. (K resistors are for reference only and will vary with temperature). Potentiometers: 3 CTS 500K potentiometers, 1V 2T. Switches: 4 single-cut switches; 1 boost switch. Capacitors: 2 orange capacitors. In addition to the original functions, four single-cut switches and an enhanced switch bring new functions. With the single-cut switch on, if the single-cut does not sound good, it may be better to use the compensation switch.

Posted under prewired Tags: alnico, fender, guitar, loaded, pickguard, pickups, prewired, strat

Our Favorite Strat Pickups For People Who Don T Really Like The Sound Of Strats Fralin Steel Pole

Posted On | Comments Closed |

Posted under favorite Tags: favorite, fralin, people, pickups, pole, really, sound, steel, strat, strats

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On November 16, 2024 | Comments Closed |

To prevent scratches and damage, the product is covered with a protective film. Please remove this protective film before installing the product on your guitar. : N (neck): 7.75K; M (middle): 9.18K; B (bridge): 14.55K. Hole Pitch: N (neck): 50 mm; M (middle): 50 mm; B (bridge): 52 mm. Installation Difficulty: Very easy to install. Weight: 700 grams per set. 1 x 3-ply guitar guard. 2 Alnico 5 single-coil pickups. 1 x 5-way switch. 3 potentiometers 1V 2T (copper shaft). 1 x single cutaway changeover switch. 1 x 400V/200V capacitor.

Posted under prewired Tags: alnico, fender, guitar, loaded, pickguard, pickups, prewired, strat

HSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On November 15, 2024 | Comments Closed |

Upgraded HSH Guitar Scraper Set. (K ohm resistance values are for reference only and will vary with temperature). 3 CTS 500K potentiometers, 1V 2T. In addition to the original functions, four single-knife switches and an enhanced switch bring new functions as follows. After turning on the single blade switch, if the single blade does not sound good, it will be better to use the compensation switch. PRODUCT SURFACE: The product is covered with a protective film to prevent scratches and damage. Be sure to remove the protective film before installing the product on your guitar.

Posted under prewired Tags: alnico, fender, guitar, loaded, pickguard, pickups, prewired, strat

SSH Prewired Loaded Pickguard with Alnico 5 Pickups for Fender Strat Guitar

Posted On November 13, 2024 | Comments Closed |

Weight: 700 grams per set. 1 x 3-ply guitar guard. 2 x Alnico 5 single coil pickups. 1 x 5-way switch. 3 x 1V 2T potentiometers (copper shaft). 2x single cutaway changeover switches. 1 x 400V/200V capacitor. IMPORTANT NOTE: The Single Cut Toggle Switch brings new functionality in addition to its original function.

Posted under prewired Tags: alnico, fender, guitar, loaded, pickguard, pickups, prewired, strat

Prewired Loaded Pickguard HHH Ainico 5 Humbucker Pickups for Fender Strat Guitar

Posted On | Comments Closed |

Neck humbucker: 7.5K (split coil 3.75K). Bridge humbucker: 15K (split coil 7.5K). Hole spacing: N:50 mm, M:50 mm, B:52 mm. Humbuckers four wires: black wire for hot end, green wire for ground, red and white wire for split coil. Material: PVC sheathing and copper coil pickups. Weight: 700 grams per set. 1 x 3-ply guitar guard. 3 Alnico 5 humbucking pickups. 1 x 5-way switch. 3 potentiometers (1 volume, 2 tone, brass shaft). 4 single cutaway switches. 1 x 400V/200V Capacitor. For example, switch on + 5-way switch in bridge position = neck and bridge pickups work together.

Posted under prewired Tags: ainico, fender, guitar, humbucker, loaded, pickguard, pickups, prewired, strat

Prewired Loaded Strat Pickguard Set, SSH Alnico 5 Humbucker Pickups for Fender St

Posted On November 9, 2024 | Comments Closed |

Product Description To prevent scratches and damage, the product is covered with a film. Please remove the film before installing the product on your guitar. Place of Origin: China. : N: 7.75K; M: 9.18K; B: 14.55K. Hole pitch: N: 50 mm M: 50 mm B: 52 mm. Uses Suitable for most FD guitars. Very easy to install Difficult t. Weight: 700 grams per set. 1 x 3-ply guitar baffle. 2 x Alnico 5 single coil pickups. 1 x Alnico 5 humb. 1 x 5-way switch. 3 x Potentiometer 1. V 2T (copper shaft). X Single cut to. 1 x Output Jack.

Posted under prewired Tags: alnico, fender, humbucker, loaded, pickguard, pickups, prewired, strat

HHH Prewired Loaded Pickguard with Humbucker Pickups for Fender Strat Guitar

Posted On November 7, 2024 | Comments Closed |

Neck humbucker: 7.5K (split coil 3.75K). Bridge humbucker: 15K (split coil 7.5K). Hole spacing: N (neck) 50mm, M (center) 50mm, B (bridge) 52mm. Humbucking four wires: black wire for hot wire, green wire for ground, red and white wire for split coil. Material: PVC guard and copper coil pickups. Weight: 700g per set. Weight: 700 grams per set. 1 x 3-ply guitar guard. 3 Alnico 5 humbucking pickups. 1 x 5-way switch. 3 potentiometers (1 volume, 2 tone, brass shaft). 4 single-pole toggle switches. 1 x 400V/200V Capacitor. Two single-pole toggle switches bring new functionality. For example, switch on + 5-way switch in bridge = neck and bridge pickups work together.

Posted under prewired Tags: fender, guitar, humbucker, loaded, pickguard, pickups, prewired, strat

SSS Prewired Loaded Pickguard with Single-coil Pickups for Fender Strat Guitar

Posted On November 4, 2024 | Comments Closed |

Material: metal, plastic, copper, magnet. Color: light yellow, customizable. Resistance: N/M/B: 6.5K-7 Kohm/ 5.5K-7 Kohm/ 6.5Kohm (K resistance is for reference only and will change with temperature). Hole Pitch: N/M/B: 52mm/52mm/52mm. Size: 285x220x60MM/11.22×8.7×2.4 inches (LxWxT). 1 x 3-ply guitar guard. 3 x N M B SSL1 V70 Alnico 5 single coil pickups. 1 x 5-way switch. 3 x CTS potentiometers 1V2T (copper shaft). 1 x 473J 400V CDE capacitor (made in USA). Pre-Wired Kit: Includes three SSL1 Alnico pickups, three CTS potentiometers, and a 5-way switch for standard American/Mexican Fender Strat or Squier Strat guitars, ideal for upgrading common guitar configurations. SUPERIOR SOUND QUALITY: Rich harmonics, bright and sweet, versatile sound, superb response, great for playing funk, blues, punk, rock and other music styles. EASY INSTALLATION: After receiving the product, just solder the ground wire to the spring claw and enjoy the perfect sound. CUSTOMIZED PACKAGING: Mounting screws are included free of charge in the package, and all parts are packed in an inserter with protective foam and a sturdy box.

Posted under prewired Tags: fender, guitar, loaded, pickguard, pickups, prewired, single-coil, strat

1 2 3 … 90 Next »

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30