THE PICKGUARD IS EQUIPPED WITH FENDER’S NOISELESS SINGLE COIL PICKUPS. THE PICKGUARD WAS REMOVED FROM THE GUITAR WITH ONLY NORMAL SCUFFS FROM PLAYING. ALL ELECTRONICS AND HARDWARE ARE ORIGINAL GENUINE FENDER PARTS. THANKS FOR LOOKING AND GOOD LUCK!
2014 Fender Custom Shop Stratocaster Josefina Loaded Pickguard From 64 Anniversary. These Hand Wound Josefina Campos pickups were pulled from a 2014 Custom Shop Anniversary 64 Relic Stratocaster. The COA and Floor Travler shown are not included just shown to verify the pickups. We built the pickguard using an older pickguard, new CRL 5 way switch, CTS pots and caps. This combination sounds truly amazing. The middle pickups is not reverse wound so you get a killer fatter tone from the 2 & 4 positions. The wire had a break from where someone nicked it when they pulled them out. Greg from Migas Touch Pickups simply detached the lead and unwound it 32 to winds to get to the break. Then he re-attached it, soldered the lead back on and flash wax potted it to seal it which is why the signature on the bottom looks fadded, the hot wax caused it. Just wanted to be up front but honestly most would never know. Again the tones these put out is freakin amazing.
2022 Genuine Fender Players Series Stratocaster Loaded Pickguard HSS. Alnico V single coils and Seymour Duncan Hotrails Humbucker. White pups and knobs. Fender Pots and 5 way switch. Great and easy Upgrade for your MIM Standard Strat.
Letting go of this awesome loaded pickguard that I had in my Strat – it’s got a Suhr Thornbucker in the neck and the newer Thornbucker II (53mm spacing) in the bridge. If you’ve ever wanted that sweet Pete Thorn tone without shelling out for the full signature Suhr, this setup got me shockingly close. This will fit standard Fender and Warmoth Strat bodies – heads up, it’s. Compatible with Suhr guitars. I originally built this as a kind of “working man’s Pete Thorn Signature” Strat. It served me incredibly well until I lucked into the real deal, so I’m passing this one along. Honestly, tone-wise, it’s been right in the ballpark at a fraction of the price. Wired up with a 920D Custom 2-humbucker harness, which I actually prefer over the quirky control setup on the official Suhr model. Comes with pickguard screws and output jack, ready to drop in and go. Tone 1: Neck Humbucker. Tone 2: Bridge Humbucker. Feel free to reach out with any questions or if you’d like more pics.
Seymour Duncan Custom Stratocaster Set. SSL-5 Custom Staggered Pole. Magnet Material: Alnico V. Number of Conductors: 2-wire. DC Resistance: 13.3K. Number of Strings: 6. DC Resistance: 6.5K. SSL-1 Vintage Staggered Pole.
Product Description To prevent scratches and damage, the product is covered with a film. Please remove the film before installing the product on your guitar. Place of Origin: China. : N: 7.75K; M: 9.18K; B: 14.55K. Hole pitch: N: 50 mm M: 50 mm B: 52 mm. N: 50 mm M: 50 mm B: 52 mm. Uses Suitable for most FD guitars. Very easy to install Difficult to install. Weight: 700 grams per set. Accessories 11 screws 11 screws. 1 x 3-ply guitar baffle. 2 x Alnico 5 single coil pickups. 1 x Alnico 5 humbucker. 1 x 5-way switch. 3 x Potentiometer 1V 2T (copper shaft). 1 x Single cut toggle switch. 1 x 400V/200V Capacitor. 1 x Output Jack. Pressing the boost switch at this time will operate the neck + middle + bridge pickups simultaneously.