For sale is these 3 Mighty Mite Strat pickups Model #1100 Distortion/Screaming Strat, a vintage 90’s Genuine Fender 11 Hole Strat aged Pearloid Pickguard, and a ACME wiring harness with blend pot. These pickups are very scare and almost totally forgotten. Flat pole pieces with original nylon wrappings. Have surface wear being vintage. Screw threads are fine. Pickups read 6.8k, 6.94k and 7.02k. Added a photo from older paperwork showing these pickups. Coils are all tested and all working great with strong readings and output. Lead wires were added since old ones were too short. Ohm meter not included. Is a vintage Genuine Fender USA 90’s Strat pickguard 11 Hole. Its a pearloid pickguard that has aged to darker color over about 30 years. Pickguard does have some minor wear but looks great for age. No cracks or shrinkage. Is an ACME wiring harness. These are very rare nowadays. ACME wiring was usually matched to be more conducive to each pot and usually the tolerances are better matched. The Middle Volume pot was a little scratchy only when turning but cleared up after turning back and forth several times, top blender pot is good and bottom tone top is good. Can read ACME on both of the top pots but bottom tone pot has its soldered over. It has an extra small ground wire if needed but is very short. Has a long ground wire to trem claw that has been spliced and taped. Both of the output jack wires are spliced/taped. Output jack does have quick disconnect wires white/black. Big glob of solder on blender pot. Will be packed safely. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickups”. The seller is “bigboxgaming” and is located in this country: US. This item can be shipped to United States.

• Type: LOADED PICKGUARD
• Brand: MIGHTY MITE FENDER

For sale is these 3 Mighty Mite Strat pickups Model #1100 Distortion/Screaming Strat, a vintage 90’s Genuine Fender 11 Hole Strat aged Pearloid Pickguard, and a ACME wiring harness with blend pot. These pickups are very scare and almost totally forgotten. Flat pole pieces with original nylon wrappings. Have surface wear being vintage. Screw threads are fine. Pickups read 6.8k, 6.94k and 7.02k. Added a photo from older paperwork showing these pickups. Coils are all tested and all working great with strong readings and output. Lead wires were added since old ones were too short. Ohm meter not included. Is a vintage Genuine Fender USA 90’s Strat pickguard 11 Hole. Its a pearloid pickguard that has aged to darker color over about 30 years. Pickguard does have some minor wear but looks great for age. No cracks or shrinkage. Is an ACME wiring harness. These are very rare nowadays. ACME wiring was usually matched to be more conducive to each pot and usually the tolerances are better matched. The Middle Volume pot was a little scratchy only when turning but cleared up after turning back and forth several times, top blender pot is good and bottom tone top is good. Can read ACME on both of the top pots but bottom tone pot has its soldered over. It has an extra small ground wire if needed but is very short. Has a long ground wire to trem claw that has been spliced and taped. Both of the outpat jack wires are spliced/taped. Output jack does have quick disconnet wires white/black. Big glob of solder on blender pot. Will be packed safely. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickups”. The seller is “bigboxgaming” and is located in this country: US. This item can be shipped to United States.

• Type: LOADED PICKGUARD
• Brand: MIGHTY MITE FENDER