High quality custom built loaded strat pickguard white pearl with mt screws. Pickups – Alnico 5 by WBC they are staggered pole pickups with cloth wire, wax potted. Pickgaurd – White pearl 11 hole Fits fender Mexican / american or similar body’s has a full pure aluminum high conducive shielding on backside. It is a 3 ply wbwp with peel off plastic film which should be peeled off when ready to use. Pots – CTS – 250k vintage series dish back strat pots #450g brass shafts and bushings. Capacitor – High quality Orange drop. Pickguard requires 3 wires be soldered (positive and negative on the output jack and ground on the tremolo claw) there is also a body shield ground wire with a eye connector to be screwed to your body shielding. Screw is not included. If you’re body is not shielded you need to cut the body shield wire off at the solder connection on the back cover of the control pot to prevent short circuits in the control cavity. This setup is meant to be an upgrade for strat players who want a high quality loaded pickguard at a fraction of the cost of name brand comparable pickguards. It is designed and voiced to a high end modern strat. My pickguards are built one at a time so the One you see is the one you get. All my pickguards are tested on a guitar. Please check back for more great pickguards and other strat stuff. Thanks for your interest.
