Fender Tex-Mex Stratocaster LOADED 3-Ply Parchment Pickguard Cover USA Strat

Posted On August 4, 2021 | Comments Closed |

The back cover still has the plastic on it. It’s wired up using the American Standard/Series wiring minus the no-load tone pot (instead it is three CTS 250k audio split shaft pots). Master volume and two tone pots, the bottom tone control for the bridge and middle and the 2nd tone control for the neck. If you’re unfamiliar with the Tex-Mex pickups they’re Alinco 5, vintage stagger and polysol magnet wire and overwound to roughly 7.4k bridge, 6.4k RWRP middle, and 6.4k neck. What I did here was modify the stagger to a modern one where the G string pole is lowered like they are on the American Standard pickups for a more balanced sound with modern unwound G strings. In addition it’s been upgraded with a treble bleed circuit on the volume pot 1/4w 150k resister and. 001uf cap in parallel and Orange Drop. It also has the standard Oak Grigsby 5-way selector switch. Just solder three points, screw down the grounding post and you’re ready to go! It also includes all of the pickguard screws as well as the grounding claw screw, a brand new Switchcraft 11 1/4 output jack and a printout of the official Fender American Strat wiring diagram. The item “Fender Tex-Mex Stratocaster LOADED 3-Ply Parchment Pickguard Cover USA Strat” is in sale since Monday, July 5, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards”. The seller is “radar-music” and is located in Washington, District Of Columbia. This item can be shipped worldwide.

Type: Pickguard
Brand: Fender
Product Type: Pickguards
Model: Tex-Mex Stratocaster

Posted under fender Tags: 3-ply, cover, fender, loaded, parchment, pickguard, strat, stratocaster, tex-mex

Fender 90s American Standard Stratocaster LOADED 3-Ply White Pickguard USA Strat

Posted On May 18, 2021 | Comments Closed |

It is fully stock except for the addition of a treble bleed circuit on the volume pot 1/4w 150k resister and. 001uf cap in parallel and Orange Drop. It has the Alnico 5 non-staggered pickups and wiring (with RWRP middle and slightly overwound 6.3k bridge, 6.0k neck/middle), TBX middle/bridge tone pot, 5-way switch and is fully wired up. Just solder three points, screw down the grounding post and you’re ready to go! It also includes all of the pickguard screws as well as the grounding ring screw, a brand new Switchcraft 11 1/4 output jack and a printout of the official Fender wiring diagram (for the newer American Series 2000 model but the overall wiring is the same). The item “Fender 90s American Standard Stratocaster LOADED 3-Ply White Pickguard USA Strat” is in sale since Saturday, May 8, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickups”. The seller is “radar-music” and is located in Washington, District Of Columbia. This item can be shipped worldwide.

Type: Single Coil Pickup
Color: White
Brand: Fender

Posted under fender Tags: 3-ply, american, fender, loaded, pickguard, standard, strat, stratocaster, white

Fender Tex-Mex Stratocaster LOADED 3-Ply Parchment Pickguard USA Standard Strat

Posted On February 27, 2021 | Comments Closed |

All of the other components including the knobs, switch tip, pots and 5-way switch are all brand new. It’s wired up using the American Standard/Series wiring minus the no-load tone pot (instead it is three CTS 250k audio split shaft pots). Master volume and two tone pots, the bottom tone control for the bridge and middle and the 2nd tone control for the neck. If you’re unfamiliar with the Tex-Mex pickups they’re Alinco 5, vintage stagger (where the G and D magnet poles are raised at the same height) and polysol magnet wire and overwound to roughly 7.4k bridge, 6.4k RWRP middle, and 6.4k neck. In addition it’s been upgraded with a treble bleed circuit on the volume pot 1/4w 150k resister and. 001uf cap in parallel and Orange Drop. It also has the standard 5-way selector switch. Just solder three points, screw down the grounding post and you’re ready to go! It also includes all of the pickguard screws as well as the grounding claw screw, a brand new Switchcraft 11 1/4 output jack and a printout of the official Fender American Strat wiring diagram. The item “Fender Tex-Mex Stratocaster LOADED 3-Ply Parchment Pickguard USA Standard Strat” is in sale since Monday, February 15, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickups”. The seller is “radar-music” and is located in Washington, District Of Columbia. This item can be shipped worldwide.

Color: Black
Brand: Fender

Posted under fender Tags: 3-ply, fender, loaded, parchment, pickguard, standard, strat, stratocaster, tex-mex

Fender Tex-Mex Stratocaster LOADED 3-Ply White Pickguard Cover USA Strat Pickups

Posted On April 22, 2020 | Comments Closed |

The pickguard and back cover are nice quality aftermarket (not sure what brand), but the covers, knobs and switch tip are genuine Fender. It shows some light signs of use but otherwise excellent and fully functional condition. It’s wired up using the American Standard/Series wiring minus the no-load tone pot (instead it is three CTS 250k audio split shaft pots). Master volume and two tone pots, the bottom tone control for the bridge and middle and the 2nd tone control for the neck. If you’re unfamiliar with the Tex-Mex pickups they’re Alinco 5, vintage stagger and polysol magnet wire and overwound to roughly 7.4k bridge, 6.4k RWRP middle, and 6.4k neck. In addition it’s been upgraded with a treble bleed circuit on the volume pot 1/4w 150k resister and. 001uf cap in parallel and Orange Drop. It also has the standard Oak Grigsby 5-way selector switch. Just solder three points, screw down the grounding post and you’re ready to go! It also includes all of the pickguard screws as well as the grounding claw screw, a brand new Switchcraft 11 1/4 output jack and a printout of the official Fender American Strat wiring diagram. The item “Fender Tex-Mex Stratocaster LOADED 3-Ply White Pickguard Cover USA Strat Pickups” is in sale since Monday, April 20, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Pickups”. The seller is “radar-music” and is located in Washington, District Of Columbia. This item can be shipped worldwide.

Color: White
Brand: Fender

Posted under fender Tags: 3-ply, cover, fender, loaded, pickguard, pickups, strat, stratocaster, tex-mex, white

Fender Tex-Mex Stratocaster LOADED 3-Ply White Pickguard Cover USA Strat Pickups

Posted On April 16, 2020 | Comments Closed |

It shows some light signs of use but otherwise excellent and fully functional condition. It’s wired up using the American Standard/Series wiring minus the no-load tone pot (instead it is three CTS 250k audio split shaft pots). Master volume and two tone pots, the bottom tone control for the bridge and middle and the 2nd tone control for the neck. If you’re unfamiliar with the Tex-Mex pickups they’re Alinco 5, vintage stagger and polysol magnet wire and overwound to roughly 7.4k bridge, 6.4k RWRP middle, and 6.4k neck. In addition it’s been upgraded with a treble bleed circuit on the volume pot 1/4w 150k resister and. 001uf cap in parallel and Orange Drop. It also has the standard Oak Grigsby 5-way selector switch. Just solder three points, screw down the grounding post and you’re ready to go! It also includes all of the pickguard screws as well as the grounding claw screw, a brand new Switchcraft 11 1/4 output jack and a printout of the official Fender American Strat wiring diagram. The item “Fender Tex-Mex Stratocaster LOADED 3-Ply White Pickguard Cover USA Strat Pickups” is in sale since Tuesday, April 14, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Pickups”. The seller is “radar-music” and is located in Washington, District Of Columbia. This item can be shipped worldwide.

Color: White
Brand: Fender

Posted under fender Tags: 3-ply, cover, fender, loaded, pickguard, pickups, strat, stratocaster, tex-mex, white

FENDER CUSTOM SHOP Stratocaster’54 Pickup Set loaded 3-ply pickguard Strat Tele

Posted On January 6, 2020 | Comments Closed |

Biete hier ein original Custom Shop 54 Strat Set, Made in USA, komplett prof. Pickguard, Fender, CTS etc. KEINE klassische Strat-Schaltung, sondern eine Kombination aus Strat und Tele, die sich über den zweiten Tone-Poti wählen / überblenden und mit einem Fender 3-Wege-Schalter schalten lässt. Mögliche Schaltungen je nach Wahl (Strat / Tele): Steg, Steg-Mitte, Mitte, Alle 3 PUs zusammen, Hals-Mitte, Hals. Tone und Volume lassen sich also über jeweils einen Poti regeln. Schon nice – ihr habt einen Fender Tele- und Strat-Sound in auf einer Gitarre. Ich brauche das jetzt nicht unbedingt, da ich eine tolle Strat mit Fat 50’s und eine alte Tele habe; darum verkaufe ich hier das voll geladene Pickguard zum guten Kurs. Preisvorschläge sind willkommen; aber bitte ralistisch bleiben. Kommt sehr gut verpackt per DHL. Wie immer: Privatverkauf – keine Garantie, Gewährleistung oder Rücknahme nach EU Recht – keine Nachverhandlungen! The item “FENDER CUSTOM SHOP Stratocaster’54 Pickup Set loaded 3-ply pickguard Strat Tele” is in sale since Sunday, January 5, 2020. This item is in the category “Musikinstrumente\Gitarren & Bässe\E-Gitarren”. The seller is “rollergobi” and is located in Hamburg. This item can be shipped worldwide.

Produktreihe: Fender Stratocaster
Marke: Fender
Modell: Custom
Ausführung: Rechtshand
Anzahl der Saiten: 6

Posted under fender Tags: 3-ply, custom, fender, loaded, pickguard, pickup, shop, strat, stratocaster'54, tele

2017 Fender Eric Johnson Strat 3-Ply LOADED PICKGUARD Vintage Reissue USA Guitar

Posted On August 31, 2018 | Comments Closed |

2017 Fender American “Artist Series” Eric Johnson Stratocaster Loaded Pickguard Assembly. Fender Eric Johnson vintage-voiced Stratocaster Single-coil Pickups set (exclusive to this model Stratocaster). 3-ply Parchment White’57 reissue screw pattern mount pickguard. Complete original mounting screws set included. All original wiring as it came new from Fender, no functional issues with any of the components. The protective plastic film has not been removed from the pickguard (please see all 12 photos). These EJ pickups are really among the best pickups Fender has produced, in my opinion. Feedback – Usually left about once a week. The item “2017 Fender Eric Johnson Strat 3-Ply LOADED PICKGUARD Vintage Reissue USA Guitar” is in sale since Wednesday, July 18, 2018. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar Parts\Pickguards”. The seller is “redhouseguitar” and is located in Allen, Texas. This item can be shipped worldwide.

Product Type: Pickguards
To Fit Guitar: Electric Guitar
Model: Stratocaster
To Fit: Electric Guitar
Country/Region of Manufacture: United States
Brand: Fender
Country of Manufacture: United States

Posted under fender Tags: 3-ply, eric, fender, guitar, johnson, loaded, pickguard, reissue, strat, vintage

« Previous 1 2

April 2026
M	T	W	T	F	S	S
« Mar
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30