Cream_Yellow_Guitar_Prewired_Loaded_Pickguard_SSS_Plate_Fit_Fender_Strat_01_pqd

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Strat pick guard and pickups set is suitable for American Fender & classic electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item. The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch, volume tone control knobs, 11 screws. 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Neck 5.75K; Middle 5.75K; Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm; 50mm; 52mm. 11-Holes standard SSS strat pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference. Separated capacitors for each tone control, which really cleans up the tone when using the switch, and the simple circuit design of circuit makes for a great sound. All you need is to connect are wires to the jack and a ground wire, knobs are very light and sensitive, so, to make sure when you plug it in that it’s not cranked up to the max, also make sure to line your guitar cavity with copper foil tape if it does not have one yet before installing, because it helps with the grounding to prevent buzz/hum. This particular set are a more vintage, old fashioned chime filled strat tone. Features: – Made of metal and ABS magnetic material, durable to use. Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Weight: 318g/11.22 ounces, Size:24521048mm / 9.658.271.89in Package Included: 1 Loaded Strat Guitar Pickguard 11 Holes screws How to Install: 1. Check the size of pickguard set. Mark the guitar according to matching 11 holes matched on the pickguard plate. Use a drill tool to grind the area above the ST guitar bridge. Tear off the thin protective film on the pickguard & make screws enter and line up. Solder the white and black wire to the output jack after removing the old wires. After the stratocaster kit is installed completely, and then you can turn on the switch to test the sound. Note: Please allow slightly measuring deviation due to manual measurement. Metal, PVC, Ceramic magnet. 11.38 x 9.8 x 1.57 inches. Kindly check your instrument if this item is suitable for replacement according to the item specifictions before you place the order. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards”. The seller is “myles-music-shop” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Vietnam.
  • Type: Pickguard
  • Instrument: Electric Guitar
  • Number of Strings: 6
  • Material Type: Metal, PVC, Ceramic magnet
  • Item Weight: 15.1 ounces
  • Color Name: Cream yellow
  • Package Dimensions: 11.38 x 9.8 x 1.57 inches
  • Guitar Pickup Configuration: Magnetic-single-coil
  • Color: Cream Yellow
  • UPC: 7445001630697
  • EAN: 07445001630697

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Posted under cream Tags: , , , , , , , ,
Cream_Yellow_Guitar_Prewired_Loaded_Pickguard_SSS_Plate_Fit_Fender_Strat_01_an

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Strat pick guard and pickups set is suitable for American Fender & classic electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item. The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch, volume tone control knobs, 11 screws. 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Neck 5.75K; Middle 5.75K; Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm; 50mm; 52mm. 11-Holes standard SSS strat pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference. Separated capacitors for each tone control, which really cleans up the tone when using the switch, and the simple circuit design of circuit makes for a great sound. All you need is to connect are wires to the jack and a ground wire, knobs are very light and sensitive, so, to make sure when you plug it in that it’s not cranked up to the max, also make sure to line your guitar cavity with copper foil tape if it does not have one yet before installing, because it helps with the grounding to prevent buzz/hum. This particular set are a more vintage, old fashioned chime filled strat tone. Features: – Made of metal and ABS magnetic material, durable to use. Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Weight: 318g/11.22 ounces, Size:24521048mm / 9.658.271.89in Package Included: 1 Loaded Strat Guitar Pickguard 11 Holes screws How to Install: 1. Check the size of pickguard set. Mark the guitar according to matching 11 holes matched on the pickguard plate. Use a drill tool to grind the area above the ST guitar bridge. Tear off the thin protective film on the pickguard & make screws enter and line up. Solder the white and black wire to the output jack after removing the old wires. After the stratocaster kit is installed completely, and then you can turn on the switch to test the sound. Note: Please allow slightly measuring deviation due to manual measurement. Metal, PVC, Ceramic magnet. 11.38 x 9.8 x 1.57 inches. Kindly check your instrument if this item is suitable for replacement according to the item specifictions before you place the order. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards”. The seller is “myles-music-shop” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Vietnam, Uruguay.
  • Type: Pickguard
  • Instrument: Electric Guitar
  • Number of Strings: 6
  • Material Type: Metal, PVC, Ceramic magnet
  • Item Weight: 15.1 ounces
  • Color Name: Cream yellow
  • Package Dimensions: 11.38 x 9.8 x 1.57 inches
  • Guitar Pickup Configuration: Magnetic-single-coil
  • Color: Cream Yellow
  • UPC: 7445001630697
  • EAN: 07445001630697

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Posted under cream Tags: , , , , , , , ,
Cream_Yellow_Guitar_Prewired_Loaded_Pickguard_SSS_Plate_Fit_Fender_Strat_01_ykl

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Strat pick guard and pickups set is suitable for American Fender & classic electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item. The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch, volume tone control knobs, 11 screws. 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Neck 5.75K; Middle 5.75K; Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm; 50mm; 52mm. 11-Holes standard SSS strat pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference. Separated capacitors for each tone control, which really cleans up the tone when using the switch, and the simple circuit design of circuit makes for a great sound. All you need is to connect are wires to the jack and a ground wire, knobs are very light and sensitive, so, to make sure when you plug it in that it’s not cranked up to the max, also make sure to line your guitar cavity with copper foil tape if it does not have one yet before installing, because it helps with the grounding to prevent buzz/hum. This particular set are a more vintage, old fashioned chime filled strat tone. Features: – Made of metal and ABS magnetic material, durable to use. Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Weight: 318g/11.22 ounces, Size:24521048mm / 9.658.271.89in Package Included: 1 Loaded Strat Guitar Pickguard 11 Holes screws How to Install: 1. Check the size of pickguard set. Mark the guitar according to matching 11 holes matched on the pickguard plate. Use a drill tool to grind the area above the ST guitar bridge. Tear off the thin protective film on the pickguard & make screws enter and line up. Solder the white and black wire to the output jack after removing the old wires. After the stratocaster kit is installed completely, and then you can turn on the switch to test the sound. Note: Please allow slightly measuring deviation due to manual measurement. Metal, PVC, Ceramic magnet. 11.38 x 9.8 x 1.57 inches. Kindly check your instrument if this item is suitable for replacement according to the item specifictions before you place the order. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards”. The seller is “myles-music-shop” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Vietnam, Uruguay.
  • Type: Pickguard
  • Instrument: Electric Guitar
  • Number of Strings: 6
  • Material Type: Metal, PVC, Ceramic magnet
  • Item Weight: 15.1 ounces
  • Color Name: Cream yellow
  • Package Dimensions: 11.38 x 9.8 x 1.57 inches
  • Guitar Pickup Configuration: Magnetic-single-coil
  • Color: Cream Yellow
  • UPC: 7445001630697
  • EAN: 07445001630697

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Posted under cream Tags: , , , , , , , ,
Cream_Yellow_Guitar_Prewired_Loaded_Pickguard_SSS_Plate_Fit_Fender_Strat_01_drpi

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Strat pick guard and pickups set is suitable for American Fender & classic electric guitar, SQ, MTM, 11 screw mounting holes in the side of pickguard, please verify the pickguard dimensions when you order the item. The Prewired scratch plate with neck/middle/bridge single coil pickups, ceramic magnet with 250K pots and 5 way switch, volume tone control knobs, 11 screws. 3 Pickups have bright spanky articulate single coil sound, classic staggered flat fixed pole pieces, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Neck 5.75K; Middle 5.75K; Bridge 6.4K, Pickups Pole Spacing N/M/B: 50mm; 50mm; 52mm. 11-Holes standard SSS strat pickguard is made of 3Ply PVC plastic material, Cream/Black/Cream, 1 layer thin protective film on the front surface of the pickguard, peel off after installation, durable and uneasily damaged when use, PURE aluminum foil shield on the backside, better shielding property and anti-interference. Separated capacitors for each tone control, which really cleans up the tone when using the switch, and the simple circuit design of circuit makes for a great sound. All you need is to connect are wires to the jack and a ground wire, knobs are very light and sensitive, so, to make sure when you plug it in that it’s not cranked up to the max, also make sure to line your guitar cavity with copper foil tape if it does not have one yet before installing, because it helps with the grounding to prevent buzz/hum. This particular set are a more vintage, old fashioned chime filled strat tone. Features: – Made of metal and ABS magnetic material, durable to use. Triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. Weight: 318g/11.22 ounces, Size:24521048mm / 9.658.271.89in Package Included: 1 Loaded Strat Guitar Pickguard 11 Holes screws How to Install: 1. Check the size of pickguard set. Mark the guitar according to matching 11 holes matched on the pickguard plate. Use a drill tool to grind the area above the ST guitar bridge. Tear off the thin protective film on the pickguard & make screws enter and line up. Solder the white and black wire to the output jack after removing the old wires. After the stratocaster kit is installed completely, and then you can turn on the switch to test the sound. Note: Please allow slightly measuring deviation due to manual measurement. Metal, PVC, Ceramic magnet. 11.38 x 9.8 x 1.57 inches. Kindly check your instrument if this item is suitable for replacement according to the item specifictions before you place the order. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Pickguards”. The seller is “myles-music-shop” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Vietnam, Uruguay.
  • Type: Pickguard
  • Instrument: Electric Guitar
  • Number of Strings: 6
  • Material Type: Metal, PVC, Ceramic magnet
  • Item Weight: 15.1 ounces
  • Color Name: Cream yellow
  • Package Dimensions: 11.38 x 9.8 x 1.57 inches
  • Guitar Pickup Configuration: Magnetic-single-coil
  • Color: Cream Yellow
  • UPC: 7445001630697
  • EAN: 07445001630697

Cream Yellow Guitar Prewired Loaded Pickguard SSS Plate Fit Fender Strat
Posted under cream Tags: , , , , , , , ,
Partscaster_Strat_HH_withEVH_Wolfgang_Loaded_Pickguard_2020_Graffiti_Yellow_01_aibo

Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow

Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow

Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Partscaster Strat HH w/EVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow. This is a Partscaster Strat that was put together using high quality pieces in February of 2020. The guitar is in excellent condition with the only blemishes being near the string ferrules. All functions work flawlessly and this guitar sounds and feels amazing. Fender CTS pots and switch (Vol, Tone, 3-Way). Mighty Might maple neck with Ebony Fretboard. Allen Eden Alder body. 80s Fender Japan Gotoh tuners. Fender Strap Lock buttons. Overall, this guitar is an amazing build. It has recently been professionally set-up, just as a note this was set up with 10-52 gauge strings, so it may need to be adjusted to your string size preference. The item “Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow” is in sale since Tuesday, November 10, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Electric Guitars”. The seller is “mzillah” and is located in Hollywood, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Size: Full Size
  • Body Color: Yellow
  • String Configuration: 6 String
  • Model Year: 2020
  • Series: Partscaster
  • Type: Electric Guitar
  • Fretboard Material: Ebony
  • Number of Frets: 21
  • Neck Material: Maple
  • Handedness: Right-Handed
  • Body Material: Alder
  • Brand: Unbranded
  • Set Includes: Gig Bag
  • Body Type: Solid

Partscaster Strat HH withEVH Wolfgang Loaded Pickguard 2020 Graffiti Yellow
Posted under partscaster Tags: , , , , , , ,