https://stratloadedpickguard.com Sat, 24 Oct 2026 06:47:17 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-bronze-aluminum-alnico-5-pickups-set/ https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-bronze-aluminum-alnico-5-pickups-set/#comments Mon, 21 Sep 2026 11:12:40 +0000 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-bronze-aluminum-alnico-5-pickups-set/









The surface of the product is covered with a film to prevent scratches and damage. Please remove the film before installing the product on the guitar. Prewired set? Prewired electric guitar pickguard set with three Alnico pickups, three CTS potentiometers, one 5-way switch, Fits for standard U. /Mexican St starts, perfect replacement for upgrading any common guitars configuration. Superior Sound Quality? – Harmonic rich, bright and sweet, versatile set of sound, super responsive, ideal for playing funk, blues, punk, rock and roll. Easy to install? Everything above is already installed, including the output jack, just solder the ground wire to spring claw after receiving it. Please be ready to enjoy the perfect sounds. Customized package? Mounting screws are included in package for free, and all the above are packed into a inserter and sturdy box with protective foam inside. Antique Copper Brushed Aluminum Pickguard – Premium Upgrade for High-End Guitars. Crafted from exquisite antique copper aluminum with a brushed finish, this pickguard delivers a sophisticated and unique gleam. Designed for high-end guitars, it offers excellent protection against scratches while enhancing the overall aesthetic with its luxurious look. Perfect for guitarists who seek to elevate both the tone and appearance of their instrument, this pickguard is the ideal upgrade for those who appreciate attention to detail and superior quality. Material: Metal, plastic, copper, magnets Resistance: N/M/B: 6.16Kohm/6.57Kohm/ 7Kohm (K resistance is for reference only, which will change as the temperature changes) Hole Distance: N/M/B: 52mm/52mm/52mm Size: 285x220x60MM/11.22×8.7×2.4Inch (L x W x T) Weight: 700g/1.54lb. 1X 3-ply Guitar Pickguard. 3X Alnico 5 N M B single coil pickups. 3X CTS potentiometer 1V2T (Copper Shaft). 1X 473J 400V CDE Caps (Made in USA).

]]> https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-bronze-aluminum-alnico-5-pickups-set/feed/ 0 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-with-kill-switch-coil-splitting-set/ https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-with-kill-switch-coil-splitting-set/#comments Wed, 26 Aug 2026 09:34:38 +0000 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-with-kill-switch-coil-splitting-set/


Prewired Set:HHH Prewired Guitar Strat Pickguard Set with 11 pre-drilled holes, providing an easy and reliable installation process. Pickups :3 x Alnico 5 Humbucking Pickups Known for their powerful and well-balanced sound, these pickups offer warm, dynamic tones suitable for a wide range of music styles. Coil-Splitting:Experience versatile tone with the Electric Guitar Coil Splitting Switch, toggling between humbucking and single-coil sounds for added flexibility. Kill Switch:The Prewired Pickguard Set boasts a Stainless Steel Kill Switch for effortless stuttering effects, enhancing musical expression. Compatibility:Fits American/Mexican Strat Standard Modern Style: Specifically designed to fit these models, ensuring a snug and perfect fit for a seamless upg.

]]> https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-with-kill-switch-coil-splitting-set/feed/ 0 https://stratloadedpickguard.com/strat-pickup-comparison-fralin-bare-knuckle-lollar-fender-seymour-duncan-shootout/ https://stratloadedpickguard.com/strat-pickup-comparison-fralin-bare-knuckle-lollar-fender-seymour-duncan-shootout/#comments Tue, 19 May 2026 16:51:42 +0000 https://stratloadedpickguard.com/strat-pickup-comparison-fralin-bare-knuckle-lollar-fender-seymour-duncan-shootout/ ]]> https://stratloadedpickguard.com/strat-pickup-comparison-fralin-bare-knuckle-lollar-fender-seymour-duncan-shootout/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-50s-a5-style-player-grade-treble-bleed-for-fender/ https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-50s-a5-style-player-grade-treble-bleed-for-fender/#comments Sat, 09 May 2026 16:27:41 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-50s-a5-style-player-grade-treble-bleed-for-fender/





Part of my player grade bench series. Workshop builds assembled from quality components sourced from previous projects, then reworked, wired and fully tested on the bench. A versatile setup with a clear, open neck tone and a little more push from the bridge when you lean into it. A balanced set that covers clean rhythm through to slightly hotter lead tones, with the hand-wound pickups adding character, dynamics and depth. Hand-wound bridge and middle pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-50s-a5-style-player-grade-treble-bleed-for-fender/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-60s-hand-wound-alnico-5-cts-oak-grigsby-prewired/ https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-60s-hand-wound-alnico-5-cts-oak-grigsby-prewired/#comments Sat, 09 May 2026 04:26:41 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-60s-hand-wound-alnico-5-cts-oak-grigsby-prewired/









Hand-wound’60s Strat-style loaded pickguard, hand-wired with quality components and ready to drop in. The result is a classic’60s Strat tone with added sparkle on the top end, while still holding onto body and balance. With a slightly stronger presence, it cuts through cleanly and stays defined when pushed, delivering that familiar bell-like Strat character without turning muddy under gain. Everything is fully assembled, hand-wired and tested before it leaves the bench, so you get a clear, articulate setup that drops straight into your guitar. No soldering, no chasing parts, no guesswork. High-scatter Hand-wound Classic’60s Strat-style single coils. 42 AWG poly magnet wire. Middle: 6.0k (RWRP for hum-cancelling in positions 2 & 4). Oak Grigsby 5-way blade switch. CTS 250k audio taper pots. 0.047µF 225P film capacitor, Elpac. Tone 2: middle + bridge. Fits most modern Strat-style guitars. May not fit some Squier models.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-vintage-60s-hand-wound-alnico-5-cts-oak-grigsby-prewired/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-style-fits-fender/ https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-style-fits-fender/#comments Thu, 30 Apr 2026 16:09:42 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-style-fits-fender/





Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. A versatile setup – clear and open in the neck, with a bit more push from the bridge when you lean into it. A balanced set that covers clean rhythm through to slightly hotter lead tones, with the hand-wound pickups adding character and depth. Hand-wound bridge and middle pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-style-fits-fender/feed/ 0 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-wilkinson-alnico-5-humbucker-pickups/ https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-wilkinson-alnico-5-humbucker-pickups/#comments Mon, 27 Apr 2026 16:03:41 +0000 https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-wilkinson-alnico-5-humbucker-pickups/













The surface of the product is covered with a film to prevent scratches and damage. Please remove the film before installing the product on the guitar. Material: Metal, plastic, copper, magnets. Resistance: N/M/B: 6.5Kohm/ 6.8Kohm/ 14.5Kohm. (K resistance is for reference only, which will change as the temperature changes). Hole Distance: N/M/B: 50mm/52mm/52mm. 1X 3-ply Guitar Pickguard. 2X single coil pickups. 1X 473J 400V Caps (Made in USA). In addition to the original function, the single-cut toggle brings new functions, as follows. Toggle on + 5-way at the bridge pickups = neck and bridge pickups work together. Toggle on + 5-way at the middle pickups = neck and middle pickups work together.

]]> https://stratloadedpickguard.com/for-strat-guitar-prewired-loaded-pickguard-wilkinson-alnico-5-humbucker-pickups/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-60s-style-fits-fender/ https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-60s-style-fits-fender/#comments Thu, 23 Apr 2026 15:55:39 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-60s-style-fits-fender/





Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. Loaded vintage 11-hole pickguard with hand-wound Alnico 5 pickups, voiced for a medium-wound early’60s-style tone. The neck is lower output and clear, with a slightly hotter bridge that holds up well for clean lead work. A balanced, expressive set with plenty of character from the hand-wound, high-scatter pickups. Hand-wound Alnico 5 pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-hand-wound-alnico-5-set-vintage-60s-style-fits-fender/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-modded-alnico-5-set-duncan-designed-fits-fender/ https://stratloadedpickguard.com/strat-loaded-pickguard-modded-alnico-5-set-duncan-designed-fits-fender/#comments Sun, 19 Apr 2026 03:46:41 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-modded-alnico-5-set-duncan-designed-fits-fender/





Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. Loaded with modified Duncan Designed Alnico 5 pickups, with a hotter bridge and a medium-wound neck and middle. The factory shielding has been removed, which opens them up and improves clarity. A solid, punchy setup with a bit more output in the bridge while keeping usable, balanced tones across the other positions. Modified Duncan Designed Alnico 5 pickups. RWRP middle for hum-cancelling in positions 2 & 4. Protective film still on pickguard.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-modded-alnico-5-set-duncan-designed-fits-fender/feed/ 0 https://stratloadedpickguard.com/strat-loaded-pickguard-fender-v-mod-ii-pickups-fits-fender/ https://stratloadedpickguard.com/strat-loaded-pickguard-fender-v-mod-ii-pickups-fits-fender/#comments Tue, 07 Apr 2026 15:23:40 +0000 https://stratloadedpickguard.com/strat-loaded-pickguard-fender-v-mod-ii-pickups-fits-fender/






Part of my Bench Series – builds assembled from quality components pulled from previous projects, reworked and tested on the bench. Fitted with Fender V-Mod II pickups, CTS pots and an upgraded Fender Oak Grigsby 5-way switch. These pickups are used in the American Professional II series and are known for blending vintage warmth with clear, modern articulation. A versatile setup with good balance across all positions – clean and articulate, but still able to push when you lean into it. Fender V-Mod II pickups. RWRP middle for hum-cancelling in positions 2 & 4. Fender Oak Grigsby 5-way switch. Protective film still on pickguard.

]]> https://stratloadedpickguard.com/strat-loaded-pickguard-fender-v-mod-ii-pickups-fits-fender/feed/ 0